|
Trim-Kut discs are made of premium aluminum oxide grains bonded to a special, durable polymer backing.This special backing enables the discs to be used without a backing pad. The aggressive grinding action in combination with the cool cutting results in a rapid stock removal for many different applications. Trim-Kut discs may be trimmed as needed to expose new grinding surfaces.
|
|
AA Abrasives flap discs are made with premium zirconia alumina grain for fast stock removal. They have a long life and stay sharp for 10-15 times longer than conventional fiber discs. They provide cooler grinding and finishing in one step. They have a low noise level and lightweight design. No back up pad is required for use on portable disc grinders and sanders. Very little surface pressure is needed. They are easy to use and cost effective. Made in USA.
|
|
Made with premium aluminum oxide grain, gold stearate, these are the most efficient disc roll packages available. Their non loading pressure sensitive paper significantly decreases grit or dust contamination. Their durable backing provides a long shelf life. They are available with or without vacuum holes. Made in USA.
|
|
Gold PSA discs are individually stacked discs(not on a roll) with a peel and stick backing. Same heavy B & D weight found on our disc rolls, with a no-fil top coat to minimize loading. Each disc has a pull tab on the release liner for easy removal.
|
|
FilmBac PSA Discs are designed for sanding wood, metal, paint, fiberglass, and plastic. These individually tabbed discs are made of our finest quality Aluminum Oxide grain bonded to a tear resistant film backing and are used on a variety of random orbital or low speed DA sanders. More durable than paper backed discs with minimal mineral shelling. Special stearated coating resists loading.
|
|
Made with premium aluminum oxide grain, gold stearate, these are the most efficient disc roll packages available. Their non loading pressure sensitive paper significantly decreases grit or dust contamination. Their durable backing provides a long shelf life. They are available with or without vacuum holes. Made in USA.
|
|
FilmBac Hook & Loop Discs are designed for sanding wood, metal, paint, fiberglass, and plastic. These discs are made of our finest quality Aluminum Oxide grain bonded to a tear resistant film backing and are used on a variety of random orbital or low speed DA sanders. More durable than paper backed discs with minimal mineral shelling. Special stearated coating resists loading.
|
|
Tough but flexible aluminum oxide resin bond flaps make these wheels ideal for many applications such as deburring, finishing, polishing and cleaning. Designed for use in die grinders, flexible shaft tools and high speed portable drills. Designed for use on many different materials. Examples include, metals ferrous and non-ferrous, fiber glass, plastics, wood and rubber. Mounted flap wheels produce a uniform, consistent finish. Safe maximum RPM ratings are indicated on each wheel.
|
|
1/4-20" shank allows for quick spin-on and spin-off mounting. Tough but flexible aluminum oxide resin bond flaps make these wheels ideal for many applications such as deburring, finishing, polishing and cleaning. Designed for use in die grinders, flexible shaft tools and high speed portable drills. Designed for use on many different materials. Examples include, metals ferrous and non-ferrous, fiber glass, plastics, wood and rubber. Mounted flap wheels produce a uniform, consistent finish. Safe maximum RPM ratings are indicated on each wheel.
|
|
Unmounted flap wheels are perfect for delivering a consistent uniform finish on large pieces. They are designed for use on flexible shafts, slow speed straight or bench grinders. Safe maximum RPM ratings are indicated on each wheel.
|
|
Perfect for light removal and graining. Gives a consistent finish without loading up.
FOR USE WITH:
•WALTER LINEMATE #30-A-268 (5/8-11 THREAD)
•FEIN METAL FINISHER #WP012-27 (5/8-11 THREAD)
•DYNABRADE ELECTRIC DYNISHER #D13415 (5/8-11 THREAD)
•SUHNER UWK10-R 5" R/A GRINDER (5/8-11 THREAD)
•FLEX-LW1202S LOW SPEED POLISHER (5/8-11 THREAD)
•METABO SE12-115 W/341603950 EXTENSION, 316042950 SCREW AND 1411566230 WOOD DRIFT KEY ADAPTER (5/8-11 THREAD)
•DYNABRADE DYNISHER #D13450 (3/4" ARBOR)
•DYNABRADE DYNISHER #D13400 (3/4" ARBOR)
•CS UNITEC-PTX ECO SMART LINEAR GRINDING SYSTEM (OLD STYLE) (3/4" ARBOR KEYWAY)
•SUHNER UPK4-R R/A POLISHER (3/4" ARBOR KEYWAY)
|
|
AA Abrasives cartridge rolls are made with aluminum oxide grain and are resin bonded. Their multi-layer construction reveals new abrasive cloth materials as the outer layer wears through. They are perfect for internal and external finishing operations, and ideal for deburring, tool mark removal, cleaning and blending.
|
|
AA Abrasives cartridge rolls are made with aluminum oxide grain and are resin bonded. Their multi-layer construction reveals new abrasive cloth materials as the outer layer wears through. They are perfect for internal and external finishing operations, and ideal for deburring, tool mark removal, cleaning and blending. They are securely and uniformly wound to create a balanced tool with a true center. They are perfect for finishing jobs with channels, irregular contours and angles. They are economical and fast cutting.
|
|
No Lap Bands are made with aluminum oxide grain and resin bonded. They are perfect for finishing curved and contoured surfaces. For use with expanding rubber drum.
|
|
Sharp, fast clean - aluminum oxide grain cutting abrasive material used for polishing, finishing, sanding, deburring and other maintenance associated with tool and welding shops. Flexible cloth backing allows you to tear to the desired length. Excellent for contour work, and turning parts in lathes. Each roll is in a durable cardboard box. Easy to dispense material and convenient to store.
|
|
Aluminum oxide cloth sheets are excellent for general clean up on metal and wood surfaces. They outlast paper sheets 4 to 1. They have a flexible durable backing and are water resistant.
|
|
Emery cloth sheets are close coat construction and are made of emery grain. They have a cloth backing which is very flexible. They are excellent for cleaning and polishing metal surfaces. They are also used on wood.
|
|
Crocus cloth sheets are made of a natural mineral used for extremely fine finishing and polishing on metals, plastics and woods. They have a flexible cloth backing.
|
|
Silicon carbide waterproof paper is best for wet and dry sanding of metal, paints and plastics. It leaves an excellent finish on most precious metals. It has a long life and is economical.
|
|
Silicon carbide stearate coated paper sheets reduce loading of material and are excellent on wood, plastics and metals.
|
|
Garnet finishing & cabinet paper leaves an excellent finish on woods. It has a medium aggressiveness. It has
a long life and is economical.
|
|
Aluminum oxide and cabinet paper is excellent for wood sanding. It is aggressive and economical.
|
|
Silicon carbide screen cloth is excellent on plaster or speckle. It reduces loading of material and can be used wet or dry. For use on copper tubing and non-ferrous metals.
|
|
Aluminum oxide belts are resin bonded, and have tear and break resistant joints. They are excellent on all metals and hard woods. They are also available for soft woods.
Aluminum oxide Y-Wt open coat poly/cotton material have a specially coated backing which provides high performance for washable belts. The high rigidity retention resists softening wash after wash. They are great for hard and soft woods and soft metals.
Aluminum oxide J-Wt premium cotton belts are flexible enough for most contour surfaces. They are made of egyption cotton which allows the belt to last longer. The premium heat treated grain allows sharper cutting and more consistent finishes. Great on non-ferrous metals,such as aluminum and brass, hard woods, and plastics.
Aluminum oxide J-Wt plus belts are made of 100% egyption cotton and have a grinding aid which not only cools, but acts as an anti-clogging agent. J-Flex belts will conform to highty contoured surfaces and provide superior finishing and polishing. They are excellent for chrome, stainless steel, brass, titanium, bronze and hard woods.
Silicon carbide waterproof Y-Wt polyester belts are designed for the heavy duty, more abusive applications. They are 100% waterproof and are sharp cutting. They are used on non-ferrous metals, marble, plastic, glass, rubber and fiberglass.
Zirconia alumina belts are resin bonded and closed coated. They are aggressive and self sharpening. They are excellent on stainless and other tough metals.
Zirconia alumina plus belts have a grinding aid for a cooler cut and faster stock removal on stainless steel. They are resin bonded and closed coated. They are aggressive and self sharpening. They are excellent on stainless and other tough metals.
|
|
AA Abrasives offers a full line of floor sanding and finishing products. They are made of the highest quality grains and strongest backings in the industry. Our floor products resist loading and tearing. We offer items for most manufacturers of floor machines at great savings. Click above For:
Floor Rolls
Floor Paper discs
Floor Sheets
Floor Screen Discs
Sanding Belts for Floor Machines
|
|
AA Abrasives Hand Pads are extremely comformable and are an excellent alternative to steel wool. They are non-rusting and non-loading, and are excellent with solvents. They provide a uniform, clean finish and are perfect for blending grains. They are excellent on all types of metal and are defuzzing on wood products. They are reusable and color coded.
|
|
AA Abrasives non-woven rolls are helpful when longer lengths are required for your manual or machine operations. Excellent cost effective alternative to hand pads.
|
|
Premium surface conditioning material for surface preparation. Available in three different grits for blending, deburring and cleaning. For steel and stainless steel.
|
|
AA Abrasives Premium Unitized Wheels designed specifically for right angle grinders have a strong fiberglass backing so no back up pads are required. Applications Include: Deburring, Cleaning, Surface Blending, Finishing and Polishing a wide range of parts and materials. Great on all Metals, (Stainless Steel, Titanium, Aluminum, and Alloys), Plastics and Composite.
Specifications:
2SF- Medium Density Silicon Carbide Fine. Very Conformable, Nice Final Finish on all Materials.
3SF- Hard Density Silicon Carbide Fine. Longer Life, Slight Stock Removal with Strong Edge Durability Leaves a Fine Finish. Very good on Stainless Steel.
6AM- Hard Density Aluminum Oxide Medium. Coarser Grit with Stock Removal and High Cut Rate. Long Life and very Strong edge. Great on Stainless and other Metals.
|
|
AA Abrasives Premium Surface Preperation Wheels designed specifically for right angle grinders have a durable Plastic backing so no back up pads are required. Applications Include: Lite Deburring, Cleaning, Surface Blending, Finishing, Polishing and paint removal on a wide range of parts and materials. Great on all Metals, (Stainless Steel, Titanium, Aluminum, and Alloys), Plastics and Composite.
Specifications:
AFine- Soft Density Aluminum Oxide Fine, Very Conformable-Soft. Nice Final Finish On All Metals
S/CFine- Soft Density Silicon Carbide Fine, Very Conformable-Soft. Nice Final Finish On All Metals
|
|
|
|
|
|
AA Abrasives Strip-It products, (Lava Wheels), are made of abrasive grains and resins which are bonded to a strong nylon filament, which resemble black lava. They are recommended for aggressive mechanical cleaning operations. The pourous structure of this product allows for reduced loading and a cooler cut. They are excellent for providing consistent surface finishes. Applications include but are not limited to metal working, fiberglass, plastic, automotive, marine, and cleaning of cement and stone.
|
|
|
|
Rex-Cut cotton reinforced wheels are designed to be used for a variety of applications where metal removal and a nice finish is required. Their special bond differs from conventional bonded abrasives which enables them to grind and finish metals at the same time.
GFX Bond
GFX bond is designed for fine finishing, blending and polishing applications on ferrous and non-ferrous metals. GFX bond is resilient for use on contours and resists loading. These wheels are ideal for stainless steel applications.
MTX Bond
MTX Bond is designed for light or medium weld removal. MTX bond is resilient for use on contours and flat surfaces. User can easily control cutting rates by amount of pressure applied. They resist loading and offer excellent finishes for grinding aluminum and other ferrous materials. They are excellent on aluminum.
|
|
|
|
AA-Flex wheels offer one step grinding and finishing. They are constructed of aluminum oxide grains bonded to a strong, slightly flexible fiberglass reinforcing and have dimples on the grinding surface. AA-Flex wheels will remove stock much like a resin bond depressed center wheel and finish like a resin fiber disc. Excellent on stainless steel and aluminum.
|
|
AA Abrasives Premium Aluminum Oxide Threaded Plug and Tapered Wheels are resin bonded. A16R and A20R grains are designed for tougher metals where consistent stock removal and wheel life is important. Designed for hard to reach areas. A16R and A20R grains are our most popular sellers. Designed for high RPM grinders. Made in USA.
|
|
AA Abrasives resin bonded mounted points are made of premium aluminum oxide and designed for a high RPM die grinders. They are excellent for weld removal on hard to reach areas on metal and stainless steel.
|
|
|
|
|
|
|
|
|
|
|
|
The shape of the wheel is determined by the shape, size, and accessibility of the part to be ground. When grinding peripheral cutters, cup wheels are used. Dish wheels are best for formed cutters.
WA White Premium Aluminum Oxide
Used when a good cutting action is needed on all steels. When a sharp corner or radius must be held, use fine grits combined with J 0r K hardness.
GC Green Silicon Carbide
Used for non-ferrous metals such as cemented materials.
AS3 Ceramic
Our AS3 wheels feature a 30% advanced Cubitron 321 ceramic content combined with a 20% premium pink aluminum oxide grain and 50% white aluminum oxide grain that delivers cooler cuts on harder surfaces for maximum performance and life. This unique combination continually fractures, producing sharp new grinding points. Best used when heavy stock removal is necessary. Ceramic wheels are designed to grind without burn and hold form much better. They are excellent for corner and form holding applications. They exceed standard wheels when grinding materials 50 Rockenell C and harder. They're ideal for hardened tool steels, sprayed metal coatings, Iconel, Waspalloy, Hastalloy, Stellite and other high-temp alloys. In tool room applications, the AS3 will yield better results in dry grinding than conventional abrasives. They allow heavier downfeeds and faster traverse rates. Dressing is only required to restore the shape of the wheel. ISO 9002 certified quality.
|
|
AA Abrasives vitrified mounted points are made from premium pink aluminum oxide grain for fast cutting and clean finishing. They are precise dimensions, balanced and securely mounted to 1/4" or 1/8" steel shanks. Applications include deburring, tool sharpening, finishing cavities and removing mold marks and parting lines. In stock.
|
|
AA Abrasives brand wire wheels are manufactured with state of the art technology and materials. They are quality tested and out perform most major brand name wire wheels. They are an excellent option for the cost conscience consumer who isn't willing to sacrifice quality. Most heavy duty manufacturers stay with our brand after evaluating their cost per piece count.
|
|
All carbide burrs have a 1/4" shank. All burrs with a 1/4" diameter and under are solid carbide, all burrs over 1/4"" diameter have hardened steel shanks. A super cut is standard on all burrs. Resharpening and extra long shanks are available. All burrs provide an accurate and precise cut.
|
|
Our backing pad is specially designed to allow air flow behind the sanding disc, substantially increasing the life of the disc. Note: Thread sized for backing pads and disc nuts are available on special orders. Please specify model number and machine make on which accessories are to be used.
|
|
Our disc holders are constructed of soft flexible rubber. This allows for flex and consistency when needed without digging or deforming.
|
|
Made of high-impact, medium flex rubber with a metal locking device for quick changes of discs. Interchangeable with 3M Roloc System
|
|
Made of high-impact, medium flex rubber with a metal locking device for quick changes of discs. Interchangeable with Norton Speed-Lok System
|
|
Hook & Loop disc holder have a tight loop grip surface engineered specifically for paper sanding discs. They are easy to use, quick changing, and excellent on flat and contour surfaces.
|
|
Adapter shanks for 1/4-20 threaded mandrels are made of hardened steel and are reusable. They extend shank length wear.
|
|
For use with AA Abrasives Cartridge Rolls, hardened steel with plated finish. All mandrels have a 1/4" shank. Designed for high speed drills and die grinders. Made in USA.
|
|
For use with AA Abrasives No Lap Bands. Speed balanced for high performance. Made from 60 durometer live rubber which enhances controlled expansion. Designed for high speed drills and die grinders. Made in USA.
|
|
Hook & Loop style back up pads have a loose loop grip surface engineered specifically for surface conditioning discs. They are easy to use and quick changing. They are excellent on flat and contour surfaces.
|
|
AA Abrasives reusable adapter assemblies can be used for 7" and 9" type 27 or type 28 depressed center wheels. They have a 5/8-11 thread and heavy duty construction. They are simple to use and cost effective.
|
|
Mandrels are designed for wheel widths up to 1/4". The body and screw head have a 3/4" diameter. The overall length is 2-1/2".
|
|
Type-R back up pads are interchangeable with 3M Roloc System. They operate at a high RPM and are ideal for die grinders and flexible shafts. They have a tough 1/4" steel shank.
|
|
Merit Abrasives - Coated Abrasives product line encompasses a complete range of belts, discs, rolls, sheets and flap wheels for all your MRO and production needs, such as stock removal, dimensioning, grinding, deburring, cleaning, blending, polishing and finishing.
|
|
Merit Abrasives - Merit Non-woven Surface Finishing products have the versatility to tackle any job, whether you need to clean and remove imperfections on metal surfaces, clean built-up residue, deburr or finish a variety of surfaces, blend weld seams or create decorative finishes.
|
|
Osborn Wire Brush - Osborn Wheel Brushes are ideal for removal of material, flash, rust, paint, cleaning weld bead, deburring, deflashing, edge blending, skiving and buffing. Osborn Wire Brush - Osborn Wheel Brushes are produced in a full range of diameters, with a selection of operating face widths to perform almost any finishing task.
|
|
Osborn Wire Brush - Osborn Cup Brushes are made in three different types: knotted steel and stainless steel wire for heavy duty, crimped wire for lighter surface preparation and deburring, and ATB filaments for finishing work. Osborn Wire Brush - Osborn Cup Brushes are easily mounted on CNC machines and portable tools, air or electric powered.
|
|
Osborn Wire Brush - Osborn End Brushes are designed to have the ends of the fill strands do the bulk of the work, however the sides can also be used to finish vertical surfaces that parallel the shaft. Osborn Wire Brush - Osborn End Brushes are made in knot, crimped, and straight wire of carbon and stainless steel, brass, ATB filaments and other non-metallics, and are especially suitable for CNC machines, portable air and electric tools in tight spaces.
|
|
Osborn Wire Brush - Osborn Internal Brushes are primarily used in CNC machines, portable tools and drill presses for cross hole deburring and fast cleaning and finishing of inaccessible surfaces such as small diameter bores and internally threaded surfaces. Osborn Wire Brush - Osborn Internal Brushes are made in steel, stainless steel, brass, nylon and ATB filaments.
|
|
Osborn Wire Brush - Osborn ATB Abrasives Nylon Brushes are designed specifically for mechanical finishing tasks such as deburring, sharp edge removal, radiusing, edge contouring, de-fuzzing, surface refinement and conditioning, plateau finishing, blending imperfections, reduction of surface stresses and micro crack propagation, cleaning, polishing and surface wiping prior to inspection gauging.
|
|
Osborn Wire Brush - Osborn Wide Face Brushes are designed for surface conditioning, finishing, scrubbing and cleaning of metal coil and sheet stock, shaped products, and specialties such as printed circuit boards. Osborn Wire Brush - Osborn Wide Face Brushes can also be used on annealing/pickling, galvanizing, paint coating, and other large area, high production lines.
|
|
Osborn Wire Brush - Osborn Abrasives high-quality line of cut-off, grinding, combination wheels and flap discs offer strength, durability, speed, convenience and economy to every job.
|
|
Osborn Wire Brush - Osborn Maintenance Brushes offer a complete line of industrial janitorial products designed for fast, efficient and thorough cleaning, scrubbing and washing jobs.
|
|
Osborn Wire Brush - Osborn Paint Brushes offer quality and dependability for maximum value and performance on all industrial and professional painting jobs.
|
|
Osborn Wire Brush - Osborn Economy Brushes are designed as an economical alternative to high-value Osborn brushes. Osborn Wire Brush - Osborn Economy Brushes offer consistent quality that outperforms other DIY and professional power brush lines.
|
|
Standard Abrasives - Coated & Bonded Abrasives include high performance cartridge rolls, cross pads, cut-off wheels, flap discs, overlap cloth discs, psa discs, quick-change and resin fiber discs, slotted cloth discs, large and small flap wheels, shop rolls, cloth and paper sheets, spiral bands, square pads and tapered cone points. Standard Abrasives offers their coated abrasive products in aluminum oxide, zirconium, ceramic and silicon carbide grains.
|
|
Standard Abrasives - Non-Woven Abrasives products include surface conditioning bands, surface conditioning belts, buff & blend circle buff, combi-wheels, cross buffs, combi-cross buffs, buff & blend discs, cleaning discs, edge pro surface conditioning discs, felt polishing discs, surface conditioning flap discs, surface conditioning discs, unitized type 27 wheels, buff & blend mounted and unmounted flap brushes, hand pads and power pads, hook & loop glove kits, unitized mounted points, buff & blend rolls, surface conditioning FE stars, buff & blend wheels, convolute wheels and unitized wheels.
|
|
Standard Abrasives - Hardware and Adapters are made of the highest quality materials. They include adapters for flap wheels, holder pads, flange adapters for convolute wheels and flap brushes, holder pads for hand pads, edge pro, hook & loop, large diameter hard face, psa and small diameter discs, mandrels for cartridge rolls, circle buffs, cross buffs, cross and square pads, disc pads, P.A.R.T. discs, plain, slotted and overlap discs, tapered cone points and unitized wheels, reducer bushings for flap wheels and rubber drums.
|
|
Standard Abrasives - Mini Test Kits include Standard Abrasives Mini Laminated Disc Kit, Standard Abrasives Mini Cross Buff Kit, Standard Abrasives Mini Track Cleaning Kit, Standard Abrasives Edge Pro TR Promo Kit, Standard Abrasives Quick Change TR Variety Kit, Standard Abrasives Surface Conditioning Mini FE Disc Kit, Standard Abrasives Unitized Wheel Variety Kit, Standard Abrasives Unitized Mounted Point Kit, Standard Abrasives Paint & Anodized Removal Tools(P.A.R.T.)Kit.
|
|
CS Unitec offers professional power tools and abrasive accessories for surface finishing on steel, stainless steel, aluminum and other metals, as well as rigid plastics and wood.
|
|
CS Unitec offers professional power tools and abrasive accessories for surface finishing on steel, stainless steel, aluminum and other metals, as well as rigid plastics and wood.
|
|
CS Unitec offers the most complete range of lightweight portable diamond core drilling machines and rigs. Ideal for drilling holes in floors, walls, ceilings, and all concrete anchoring systems. Easy to use for fast drilling of reinforced concrete, concrete, brick, block and stone. All drills are equipped with a "slip clutch". Models are available for wet or dry drilling.
|
|
CS Unitec portable magnetic drills are ideal for drilling structural steel and virtually any metal. They offer the most compact and powerful series of portable magnetic drills for holes up to 5" diameter. All CS Unitec drills are heavy-duty for use in construction and industry. The complete product line includes electric, pneumatic and hydraulic.
|
|
CS Unitec Rotary Hammer Drills are ideal for drilling holes in concrete, brick and masonry, as well as straight drilling of steel and wood. The safety clutch protects against overloading and jamming.
|
|
CS Unitec portable saws and tools are ideal for cutting pipe, structural steel, tanks, bolts, angle iron, concrete and other materials, including plastic and wood. They offer the widest range of portable pneumatic, electric and hydraulic saws.
|
|
Dynabrade
